Beastx V3 Microbeast Flybarless System Version 3

Beastx Microbeast Flybarless System BXM76000, Version 3

Software updates: http://www.beastx.com/service_software.html

SHIPPING TO THE UK AND EU IS 9 EURO

PRICE MATCH IS AVAILABLE ON THIS PRODUCT

Beastx V3 will now offer:

• Revised tail algorithm for constant pirouettes at any speed and independent of rotor torque.
• Revised swash algorith for even more direct feeling of control, additional to that a cyclic dynamic mode for more natural/flybar-like feeling
• Pitch boost/pump function
• Revised revomix (torque precompensation) and additional revomix presets to get rid of the necessity for a computer to adjust this function
• Improved control of the servos to reduce occuring peak currents and to maintain a more stable voltage even with weak power supplies (which we hope people do not use, but it may prevent some accidents) and in connection to this also new filters to reduce vibration susceptibility

Note:

• NO Micro Settings for V3 at the moment.
• Please do not update, if you need swashplate phasing!

Serial pulse input (PPM / S-BUS / Spektrum) can be used only after softwareupdate. To update the software, the USB-interface and the latest software is required.

At the moment the Microbeast can be used with every normal Spektrum receiver. The software update is only neccessary to directly connect a Spektrum satellite to the microbeast.

The Flybarless-Revolution!

MICROBEAST has an aluminum composite design casing. Its slight di men sions allow it to be installed in practically any model helicopter. MICROBEAST can be installed horizontally as well as vertically.
The sensory system is based on the newest MEMS technology. Software with sophisticated sensor data processing makes installation in electrical & nitro model helicopters possible.

With an optional adapter cable, MICROBEAST can also be utilized solely as a tail gyro. This is recommended especially for whoever is switching from the conventional paddle system and wants to slowly approach the RIGID operation with the 3 axle solution (3G-Gyro Mode).

The well-thought-out and easy setup goes smoothly with no need of an expensive programming box or computer. This makes it easy to still change a number of settings even at the airfield.

Moreover MICROBEAST’s integrated swashplate mixer enables the use of simple remote control systems which do not have their own swashplate mixing (NO-MIX).

MICROBEAST is able to process many types of sum signals (PPM / S-BUS / Spektrum). With the optional Spektrum Satellite Adapter, installation in indoor model helicopters is also possible without a great number of wires.

Updates and advanced setup possibilities (Setups) can be done com fortably with the optional USB interface „USB2SYS“ via the BEASTLINK interface. Software for Windows & Mac can be downloaded free at www.BEASTX.com.

Content:

• MICROBEAST Version 3.0.8-6.1
  
• Receiver connection cables
• Mounting material
• Adjust tool
• Instruction manual V3
  

Optional Accessories:

• USB-Interface (settings / update)
• Spektrum-satellite adapter*
• Tail-Gyro connection cable

Technical Data:

• Operating voltage: 3,5V...8,5 V DC (Lipo 2s possible)
• Processor: 32Bit ARM
• Analog processing: 17Bit
• Sensor technology: 3 MEMS angular rate sensors
• Adjustable servo center pulse width:
• Tail: 760μs / 960μs / 1520μs
• Adjustable servo pulse rate:
• Tail: 50 Hz / 165 Hz / 270 Hz / 330 Hz
• Swashplate: 50 Hz / 65 Hz / 120 Hz / 200 Hz
• Build-in swashplate mixer:
• Mechanical / 90° / 120° / 140°
• Serial pulse input:
• PPM / S-BUS / Spektrum-satellite*
• Size: 34 x 25 x 13,5 mm
• Weight without cable: approx. 20 g

*A big thank you to Marcel Guwang for these very helpful videos